Pangood “X-POWER” Pushing Commercial Vehicles into the Era of Wheel Drive

19 September 2024

On September 17, the 2024 Hannover International Commercial Vehicles and Accessories Exhibition (hereinafter referred to as the "IAA Exhibition") officially opened. As an active promoter of the technological revolution in the electric drive industry, Pangood showcase its latest products in various fields such as buses, trucks, special vehicles, etc,providing disruptive value-improving solutions for the innovative development of the global transportation industry.

Pangood’s booth is Hall22, E36, welcome your coming!

Pure electric drive, Increase the cargo box volume by 3.5m³

PDS310KWA is the latest invention for light trucks,van and 5-7m buses by Pangood.

It uses a distributed drive,the drive motor highly integrated with tirese,eliminated the transmission half shaft and a large number of parts,so it can be much lighter and more efficient.

In addition, its chassis is smoother and has more space.With the same height,when you use PDS310KWA in your van,the cargo platform height can be reduced by about 400mm and can fall between the wheel-side motors, thereby increasing the original cargo box volume by more than 20%; each vehicle can carry about 3.5m³ more cargo, greatly increasing the profit value with almost unchanged operating costs.

If you apply PDS310KWA to 5.5m-7.5m buses,it allows the short rear overhang mini bus to have a flat low floor structure,expand passenger space,improve satisfaction by passengers.

All-around champion BMT, a new legend for the bus industry

BMT (Bus Metro Transit) is a a great invention technology in the public transportation industry. It makes the drive motor to no longer take up space inside the bus compartment,the interior of the bus is a flat floor that runs from front to back,the interior space of buses can be expanded by more than 25%; and, It is very safe and more conducive to providing passengers with a comfortable riding experience.

In China, BMT has been installed on more than 5,000 buses.,cumulative safe driving of more than 250 million kilometers;In Europe, as the electrification of buses accelerates, more and more manufacturers are trying to use BMT in their buses.

At this IAA show,Pangood bring us a more powerful BMT. With the same volume,its single motor power has been upgraded to 160kW,its system power increased from 240kW to 320kW,applicable to a wider range of working conditions;because it is wheel hub driven, the energy consumption is also lower.

Powerful power comes from a Pangood integrated electric drive axle

To make trucks more powerful and with lower energy consumption,Pangood uses reliable and high-quality axial flux motor as its drive.Its volume and weight are about 50% lower than that of radial flux motors with the same power, and has a more widely high efficiency working range.

In that case,it can be equipped with a gearbox with more gears,each gear position has two-stage transmission, which greatly improves the transmission efficiency while ensuring that the motor is in an efficient working range at almost every vehicle speed.

In additionally,more chassis space also allows for more batteries to be placed on the chassis,which can make the vehicle's center of gravity Lower; and improve driving safety; on the other hand, the greater energy recovery ratio of the disc hub integrated heavy-duty truck electric drive axle also helps to further increase the vehicle's cruising range.

Dual-mode shifting mode with no power interruption,the response time for shifting gears is no more than 0.6 seconds,providing you a more comfortable driving.

Until now, Pangood can provide you with drive axles of various powers from 150kW to 450kW to meet your various application needs.We can also provide you with various customized wheel hub electric drive products.

Internationally patented motor winding process, new technology for your new development

At this IAA show, Pangood demonstrated the internationally patented "flat copper wire continuous winding" motor stator production process to audiences and users around the world.It does not have any welding points throughout the process, which is more conducive to automated production,the motor has a higher slot fill rate, and better energy density and torque density.

At the same time, Pangood also unveiled the world's leading 15,000rpm axial flux motor product for the first time.The three-in-one electric drive assembly using Pangood’s ICD280K motor has a peak power of 560kW, a weight of only 120kg, and a smaller envelope size, making it more suitable for high-performance SUVs and pickup trucks. While comprehensively improving vehicle driving performance, it also demonstrates China's manufacturing strength and innovation capabilities to the world.

At this IAA show,Pangood also displayed ICS300K high-power commercial vehicle motor, PDS78K mixer truck mounted electric drive, PDS15K two-wheel vehicle point drive assembly and other electric drive innovation technologies for various subdivided scenarios in the transportation field. In addition to the powerful exhibition lineup, Pangood looks forward to working with partners from all walks of life to promote the technological revolution of the electric drive industry.

Source : www.chinabuses.org

Views:4568

Share :
China Buses Contact

Please leave your questions and suggestions.

Latest News
More +